MATRIX 210™ QUICK GUIDE
23
HOST MODE PROGRAMMING
The reader can also be configured from a host computer using the Host Mode programming procedure, by commands via the
serial interface. See the Host Mode Programming file on the Mini-DVD.
ALTERNATIVE LAYOUTS
(for 25-pin models)
If you need to install an Ethernet network, ID-NET™ network, Fieldbus network, Pass-Through network, Multiplexer network or an
RS232 Master/Slave refer to the Matrix 210™ Reference Manual.
The reader can also be setup for alternative layouts by reading programming barcodes. See the "Setup Procedure Using
Programming Barcodes" printable from the Mini-DVD.
CODE QUALITY VERIFICATION
Matrix 210™ can be used as a Code Quality Verifier according to the ISO/IEC 15415, ISO/IEC 15416, AS9132, and AIM DPM
Standards.
To Next Page
Loading...
Need help?
General
