Datalogic PowerScan PD9130

Enter/Exit Programming Mode
92 PowerScan™ PD9130/PBT9100/PM9100
UPC-A Minimum Reads
This feature specifies the minimum number of consecutive times a UPC-A
label must be decoded before it is accepted as good read.
DEFAULT
UPC-A Minimum Reads = 1
UPC-A Minimum Reads = 2
UPC-A Minimum Reads = 3
UPC-A Minimum Reads = 4
UPC/EAN Quiet Zones
This feature specifies the number of quiet zones for UPC/EAN labels. Quiet
zones are blank areas at the ends of a bar code, typically 10 times the width
of the narrowest bar or space in the label. The property applies to all EAN-
UPC symbologies globally and to the ADDONs.
DEFAULT
UPC/EAN Quiet Zones = Two Modules
UPC/EAN Quiet Zones = Three Modules