Enter/Exit Programming Mode
256
PowerScan™ PD9130/PBT9100/PM9100
Enable/Disable Buttons
This feature offers the ability to enable or disable the keypad.
Figure 6. PowerScan 9100 Keypad Models
16-key keypad
4-key keypad
Key Programming
All keys enabled
DEFAULT
All keys disabled
Enable a combination of keys (4-key models only)
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
a
t left followed by 4 digits from the Alphanumeric
characters in
Appendix D, Keypad
.
Make a mistake? Scan the CANCEL
bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
To Next Page
Loading...
