Enter/Exit Programming Mode
Product Reference Guide
185
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F AIM Check = Not AIM compliant
Codablock F AIM Check = AIM compliant
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decod-
ing for the Codablock F symbology.
Variable Length.
For variable length decoding, a minimum and maximum
length may be set.
Fixed Length.
For fixed length decoding, two different lengths may be set.
DEFAULT
Codablock F Length Control = Variable Length
Codablock F Length Control = Fixed Length
To Next Page
Loading...
