Enter/Exit Programming Mode
84
PowerScan™ PD9130/PBT9100/PM9100
UPC-E Number System Character Transmission
This feature enables/disables transmission of the UPC-E system number
character.
UPC-E Number System Character = Do not transmit
UPC-E Number System Character = Transmit
DEFAULT
UPC-E Minimum Read
This feature specifies the minimum number of consecutive times a UPC-E
label must be decoded before it is accepted as good read.
UPC-E Minimum Reads = 1
UPC-E Minimum Reads = 2
DEFAULT
UPC-E Minimum Reads = 3
UPC-E Minimum Reads = 4
To Next Page
Loading...
