Datalogic PowerScan PD9130 - RF Batch Mode Transmit Delay

Enter/Exit Programming Mode
226 PowerScan™ PD9130/PBT9100/PM9100
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels
stored in batch memory.
DEFAULT
RF Batch Mode Transmit Delay = No Delay
RF Batch Mode Transmit Delay = 50 mS
RF Batch Mode Transmit Delay = 100 mS
RF Batch Mode Transmit Delay = 0.5 seconds
RF Batch Mode Transmit Delay = 1 second
RF Batch Mode Transmit Delay = 2.5 seconds