Datalogic PowerScan PD9130

Enter/Exit Programming Mode
130 PowerScan™ PD9130/PBT9100/PM9100
DATALOGIC 2 OF 5
The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the scanner will not read Datalogic 2 of 5 bar codes.
DEFAULT
Datalogic 2 of 5 = Disable
Datalogic 2 of 5 = Enable
Datalogic 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Dat-
alogic 2 of 5 check character.
DEFAULT
Datalogic 2 of 5 Check Character Calculation = Disable
Datalogic 2 of 5 Check Character Calculation = Enable