Enter/Exit Programming Mode
Product Reference Guide
131
Datalogic 2 of 5 Check Character Transmission
This option enables/disables transmission of an optional Datalogic 2 of 5
character.
Datalogic 2 of 5 Check Character Transmission = Don’t Send
Datalogic 2 of 5 Check Character Transmission = Send
DEFAULT
Datalogic 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times an Data-
logic 2 of 5 label must be decoded before it
is accepted as good read.
I 2 of 5 Minimum Reads = 1
I 2 of 5 Minimum Reads = 2
DEFAULT
I 2 of 5 Minimum Reads = 3
I 2 of 5 Minimum Reads = 4
Datalogic 2 of 5 Decoding Levels
The Datalogic 2 of 5 Decoding Level feature is set using
"I 2 of 5 Decoding Level"
on page 135.
To Next Page
Loading...
