Enter/Exit Programming Mode
82
PowerScan™ PD9130/PBT9100/PM9100
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E bar codes.
UPC-E = Disable
UPC-E = Enable
DEFAULT
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E bar
code data.
UPC-E Check Character Transmission = Don’t Send
UPC-E Check Character Transmission = Send
DEFAULT
To Next Page
Loading...
