Datalogic PowerScan PD9130 - Codablock F; Codablock F EAN Enable;Disable; Codablock F Enable;Disable

Enter/Exit Programming Mode
184 PowerScan™ PD9130/PBT9100/PM9100
CODABLOCK F
The following options apply to the Codablock F symbology.
Codablock F Enable/Disable
Enables/Disables ability of reader to decode Codablock F labels.
DEFAULT
Codablock F = Disable
Codablock F = Enable
Codablock F EAN Enable/Disable
Enables/Disables the Codablock F EAN subtype (code with FNC1 in the first
position).
DEFAULT
Codablock F EAN = Disable
Codablock F EAN = Enable