Enter/Exit Programming Mode
Product Reference Guide
213
CONFIGURATION UPDATES
See page 302 in “References” for detailed information and examples of
these features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can auto-
matically ensure they stay in sync with
regard to application hardware and/
or configuration. See page 302 for more information on this feature.
Automatic Configuration Update = Disable
Automatic Configuration Update = Enable
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the
scanner. Use this method when the Auto Configuration Update feature is
disabled and you want a one-time configuration update to be performed on
the scanner.
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
Copy Configuration to Scanner
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the
Base Station. Use this method when the Auto Configuration Update feature
is disabled and you want a one-time configuration update to be performed
on the Base Station.
Copy Configuration to Base Station
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
To Next Page
Loading...
Need help?
General
