Enter/Exit Programming Mode
Product Reference Guide
83
DISABLE ALL SYMBOLOGIES
Use this feature to disable all symbologies.
1. Scan the ENTER/EXIT PROGRAMMING Mode bar code.
2. Scan the Disable All Symbologies bar code.
3. Complete the programming sequenc
e by scanning the ENTER/EXIT
PROGRAMMING bar code.
Disable All Symbologies
This does not disable the reading of programming labels.
CODE EAN/UPC
Coupon Control
This feature is used to control the reader’s method of processing coupon
labels.
Coupon Control = Allow all coupon bar codes to be decoded
Coupon Control = Enable only UPCA coupon decoding
Coupon Control = Enable only GS1 DataBar™
coupon decoding
To Next Page
Loading...
