Enter/Exit Programming Mode
Product Reference Guide
73
Scanning Active Time
This setting specifies the amount of time that the reader stays in scan ON
state once the state is entered. The range for this setting is from 1 to 255
seconds in 1-second increments. See page 295 in “References” for further
description of this feature.
Scanning Active Time = 3 seconds
Scanning Active Time = 5 seconds
Scanning Active Time = 8 seconds
Stand Illumination Control
Controls the illumination status while the reading mode is stand mode and
the reader is attempting to detect objects.
DEFAULT
Stand Illumination Control = OFF
Stand Illumination Control = ON
Stand Illumination Control = Dim
To Next Page
Loading...
