Datalogic QuickScan I QM2131

Enter/Exit Programming Mode Code 128
150 QuickScan™ I QM21X1 / QBT21X1
Code 128 Function Character Transmission
Enables/disables transmission of Code128 function characters 1, 2, 3, and 4.
Code 128 Sub-Code Change Transmission
Enables/disables the transmission of “Sub-Code exchange” characters (NOT
transmitted by standard decoding).
$CC8TF00
Code 128 Function Character Transmission = Don’t Send
$CC8TF01
Code 128 Function Character Transmission = Send
DEFAULT
$CC8SC00
Code 128 Sub-Code Change Transmission = Disable
$CC8SC01
Code 128 Sub-Code Change Transmission = Enable
DEFAULT