Product Reference Guide 25
RS-232 ONLY Interface
Use the programming bar codes in this section if modifications to the standard
RS-232 interface settings are necessary to meet your system’s requirements.
Additional settings which apply to both the RS-232 and USB interfaces are
available in
Chapter 6, RS-232/USB-COM Interfaces.
RS-232 Standard Factory Settings
Reference Appendix B, Standard Defaults for a listing of standard factory set-
tings.
BAUD RATE on page 26 PARITY on page 29
DATA BITS on page 27 HANDSHAKING CONTROL on page 30
STOP BITS on page 28
To Next Page
Loading...
