Datalogic QuickScan I QM2131

Enter/Exit Programming Mode Datalogic 2 of 5
168 QuickScan™ I QM21X1 / QBT21X1
Datalogic 2 of 5
The following options apply to the Datalogic 2 of 5 symbology.
Datalogic 2 of 5 Enable/Disable
When disabled, the reader will not read Datalogic 2 of 5 bar codes.
Datalogic 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Data-
logic 2 of 5 check character.
$CD2EN00
Datalogic 2 of 5 = Disable
$CD2EN01
Datalogic 2 of 5 = Enable
DEFAULT
$CD2CC00
Datalogic 2 of 5 Check Character Calculation = Disable
$CD2CC01
Datalogic 2 of 5 Check Character Calculation = Enable
DEFAULT