Symbologies Enter/Exit Programming Mode
Product Reference Guide
171
Datalogic 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for Datalogic 2 of 5 Length
Control on page 170
. Length 1 is the minimum label length if in Variable Length
Mode, or the first fixed length if in Fixed Length Mode. The length includes the
bar code’s check and data characters.
The length can be set from 2 to 50 characters in increments of two. Length
includes the bar code’s data characters. See
"Set Length 1" on page 304 for
detailed programming instructions.
$CD2L1
Select Datalogic 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
06 = Length 1 is 6 Characters
To Next Page
Loading...
Need help?
General
