Enter/Exit Programming Mode Scanning Features
84 QuickScan™ I QM21X1 / QBT21X1
Flash On Time
This feature specifies the ON time for the indicator LED while in Flash Mode.
The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100
millisecond increments. See
"Flash On Time" on page 301 for more detailed
programming instructions.
$CSNFN
Select Flash ON Time Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
OA = Flash is ON for 1 Second
To Next Page
Loading...
Need help?
General
