Symbologies Enter/Exit Programming Mode
Product Reference Guide
205
Standard 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for Standard 2 of 5 Length
Control on page 203
. Length 2 is the maximum label length if in Variable
Length on page 203
Mode, or the second fixed length if in Fixed Length on
page 203
Mode. Length includes the bar code’s check and data characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See
"Set Length 2" on page 305 for
more detailed programming instructions.
$CS2L2
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters
To Next Page
Loading...
Need help?
General
