Enter/Exit Programming Mode
272 QuickScan™ I QM21X1 / QBT21X1
Features for Star Models Only
The features in this section are valid only for the QuickScan QM21XX Star
model:
•
STAR Radio Protocol Timeout on page 272 on page 272
• STAR Radio Transmit Mode on page 273
STAR Radio Protocol Timeout
This parameter sets the valid wait time before transmission between the hand-
held reader and Base Station is considered failed.
When setting this parameter, take into consideration the radio traffic (number
of readers in the same area). The selectable range for this feature is from 02 to
25 seconds. See
page 307 in “References” for detailed information and exam-
ples for setting this feature.
Set Radio Protocol Timeout
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
DEFAULT
02 = 2 Seconds Radio Protocol Timeout
To Next Page
Loading...
Need help?
General
