Datamax E-Class Mark III User Manual

Name: Datamax E-Class Mark III
Brand: Datamax
Rating: 4 (1 reviews)

58 pages

To Next Page

To Previous Page

6 Chapter 2 – Printer Setup

4) If using thermal transfer media (ribbon) proceed to Section 2.4 Loading Ribbon. Otherwise close

the printer’s Cover and press downward until latched.

312



Cover

5) Press the

button several times to advance the media (if the Fault Light is on, see Section 3.7.)



The printer is factory set to use gap media. If using another media type (for example, continuous

media), printer setup must be reconfigured; see Section 3.4

Other manuals for Datamax E-Class Mark III

Need help?

Do you have a question about the Datamax E-Class Mark III and is the answer not in the manual?

General

Print Method	Thermal Transfer / Direct Thermal
Resolution	203 dpi (8 dots/mm)
Print Speed	Up to 6 ips
Max Print Width	4.25 inches
Media Sensor	Reflective and Transmissive
Interfaces	USB, Serial
Media Types	Labels, Tags, Wristbands
Media Width	0.75 in to 4.65 in
Media Thickness	0.0025 in to 0.0100 in