34
Additional Information
This printer offers the following standard and optional features:
Standard Features
Printing
> Direct Thermal Printing
> On Demand and Batch Printing
> 203 DPI Printhead
> AGFA Scalable Font Engine
Memory
> 4 MB FLASH Memory (512K available to user, designated: Module B)
> 8 MB DRAM Memory (512K available to user, designated: Module A)
Interfaces
> USB interface
> DB-9 RS-232 serial interface
> Centronics® parallel interface
Operational
> Simple, motor driven auto-loading
> Media Tearbar, Up or Down
> Fan-fold media compatible from the rear of the printer
> Concealed power and interface cables for a "True Footprint"
Optional Features
Peel and Present Mechanism
An output control device that automatically separates printed labels from the backing material and allows
subsequent printing to occur only after the removal of a previously printed label. Minimum label length is 0.75
inches (19 mm). Designed for ease of operation, the Peel and Present Mechanism is automatically detected,
configured, and enabled when installed on the printer.
Internal Ethernet Connectivity (Factory Installed only)
An internal Network Interface Controller (NIC) that enables the printer to provide Ethernet connectivity.
External Media Supply Stand
The external media supply option allows the use of large media supply rolls, up to 8-inches in diameter, on 1" to
3" cores.
FLASH Memory Expansion (requires new main PCB)
An optional main PCB assembly is available with 8MB Flash memory expansion for International Language
Printing Capability (ILPC).
ILPC
The International Language Print Capability consisting of one of the following:
> CG-Times (western European) Scalable font
> Kanji Gothic B Scalable font*
> Simplified Chinese GB Scalable font*
> Korean Hangul font*
(* requires flash memory expansion option)
To Next Page
Loading...
Need help?
General