Datamax Mark II M-4206 User Manual

M-Class 63
User Prompts and Condition Messages
Displayed Message Description Condition(s)
!
!
SFBEZ!
!
Ready Mode.
Normal operating mode. The printer is ready to
receive and process label formats.
!
!
SFNPWF!MBCFM!
!
A label is awaiting removal.
The Present Sensor option is enabled and a
label blocks the sensor. Remove the label to
continue printing.
!
TZTUFN!
JOJUJBMJ[JOH!
!
Normal power-up and soft reset
condition.
Follows the ‘SYSTEM RESET IN
PROGRESS’ message after a reset or power-
up.
!
TZTUFN!SFTFU!!
JO!QSPHSFTT!
!
Normal power-up and soft reset
condition.
Occurs when the user resets the printer via the
host or Front Panel.
!
!
VODBMJCSBUFE!
!
The media calibration is not set.
Perform calibration; see Section 5.4.
!
YYYY!PG!YYYY!
QSJOUJOH!
!
The print job is being processed. Batch status indication, updated with each label
printed.

Datamax Mark II M-4206 Specifications

General

Print Resolution	203 dpi
Type	Label Printer
Print Method	Thermal Transfer
Max Print Speed	6 inches per second
Memory	16 MB SDRAM, 8 MB Flash
Interfaces	USB, Serial, Parallel
Media Width	4.5 inches
Media Length	0.25" to 99"
Max Print Width	4.25 inches (108 mm)