Datamax W-6208 - Page 49

W-Class 39
System Settings (continued)
PAUSE MODE
When enabled, Pause Mode suspends
printing between each label until the
PAUSE key is pressed.
ENABLED
Printer requires operator to press the
PAUSE key after each label.
DISABLED
Printer completes label batch without
pausing between labels.
SECURITY ♦
Provides the user with the ability to
password protect all printer settings made
through the operator panel.
SELECT SECURITY
Enable or disable the menu system’s
security feature.
ENABLED
Password protected.
DISABLED
No protection.
MODIFY PASSWORD
Modify the password required to access the
menu system when security is enabled.
UNITS OF MEASURE
Selects the measurement system in which
the system’s settings are represented in the
menu system and on configuration labels.
METRIC
Metric standard: Lengths in millimeters and
Counters in centimeters.
IMPERIAL
Inch standard: Lengths and Counters given
in inches.
SOP EMULATION
Enables the <STX>O and <STX>f print
positioning commands to allow backward
compatibility with label formats designed
for other printers. (When changing these
values, the printer will automatically feed
two labels to setup the new print position.)
110 (PRODPLUS)
Emulates the Prodigy Plus
®
printer.
220 (ALLEGRO)
Emulates the Allegro
®
printer.
250 (PRODIGY)
Emulates the Prodigy
™
printer.
DISABLED
No emulation, natural start of print
position.