Datasat AP25 - Page 163

AP25 Installation and Operating Guide Version 1.00
Appendix H. Serial Command AP! H-7 Document #: 9301H79500 Ver. 1.00
7. MAC Address
Command: @MAC<CR>
Operation
Response: MAC<space>[Mac adr]<CR>
Read
Reads the AP25 or AP25 network MAC address.
Parameters
[Mac adr] This is the 12 digit AP25 network interface MAC address.
Example
Send: MAC
Receive: MAC 080077124578
Format Commands
8. Format Selection
Command: @FORMAT<space>[New Format]<CR>
Operation
Response: FORMAT<space>[Format]<CR>
Read/Write
This is used to select a new format, or view the current format.
Parameters
[New Format] This is the format name to select. The name must match exactly the format
name on AP25.
Note: Spaces may be used within the name.
[Format] This is the current format name.
Example
Set the format to Digital Cinema
Send: FORMAT Digital Cinema
Receive: FORMAT Digital Cinema