AP25 Installation and Operating Guide Page 61
AP25 Installation & Operating Guide Document # 9301H79500 Ver. 1.00
Figure 34. “Expert” Nav Mode (note that several buttons are faded out
4.2.8.3 VNC: Disable Hextile Encoding
Selecting this option will improve VNC performance for some clients.
4.2.8.4 View Log File
The log file (s
hown in Figure 35, below) is a co
mplete listing of all software events that have taken place
since the AP25 was last powered on. The listing includes changes made internally by the AP25 software,
as well as user initiated system changes through the touch screen interface. You may scroll through the
log file using the front panel adjustment knob.
The log file is helpful for debugging by Datasat Digital Entertainment staff. You may be asked by the
Datasat staff to save the log files on the USB Flash drive, to send for troubleshooting purposes.
Note: The log files persist during a front panel off/on cycle. However, log files are cleared
after restarting the AP25 from a full power-on (rear panel power switch).
Select Save Diagnostic Info in the section
Update System Software From USB Device
on page 56.
Figure 35. Log File Screen
To Next Page
Loading...
