DV-332 Analog/Digital User Guide
104
S_oper_mode = COMMON
S_opt_session_expire = 0
S_opt_userisphone = NO
[TEXT_CONFIG_END]
[USER_END]
-------[END]--------
GW/CONFIG/TXTCFG>
In this printed information, the part starts with [TEXT_CONFIG_START] and ends with
[TEXT_CONFIG_END] is currently configured information.
Based on this information, you can load and modify it with any text editor. And you can input it at
once as follows.
GW/CONFIG/TXTCFG> txtpaste©
-> If you don't need to change the txtCfg file, you should type the "exit"
[TEXT_CONFIG_START]
CON_RT0_FXO_201_**11~ = 4 NULL NULL 0.0.0.0 0 0
CON_RT0_FXO_202_*1??? = 2 NULL NULL 0.0.0.0 0 0
CON_RT0_FXS_200_*99* = 4 NULL NULL 0.0.0.0 0 0
CON_RT0_FXS_200_07077003241 = 11 NULL NULL 0.0.0.0 0 0
CON_RT0_NET_0_*2??? = 0 NULL NULL 220.120.246.203 1720 0
CON_RT0_NET_0_0~ = 0 NULL NULL 0.0.0.0 0 0
CON_RT0_NET_0_~ = 0 02 NULL 0.0.0.0 0 0
C_local1_fxo_my_addr_4 = 100
C_local1_fxo_my_addr_5 = 101
C_local1_fxo_my_addr_6 = 102
C_local1_fxo_my_addr_7 = 103
C_local1_fxs_my_addr_0 = 200
C_local1_fxs_my_addr_1 = 201
C_local1_fxs_my_addr_2 = 202
C_local1_fxs_my_addr_3 = 203
C_local_fxo_group_port_4 = 201
C_local_fxo_group_port_5 = 201
C_local_fxo_group_port_6 = 202
(omitting middle parts)
S_ea_server_mode_6 = OUTBOUND
S_ea_server_mode_7 = OUTBOUND
S_ea_server_mode_8 = OUTBOUND
S_ea_server_mode_9 = OUTBOUND
S_keynumber_mode = YES
S_localcall = YES
S_oper_mode = COMMON
S_opt_session_expire = 0
To Next Page