Davolink DV-332 - SIP Configuration; Basic SIP Settings

DV-332 Analog/Digital User Guide
18
5.1 Setting SIP
5.1.1 Basic setting
Representative No for the registration of server & each port’s phone number, setting procedure
should be done as following. Setting is easy by using “auto_easyconf” order. The below setting is
an example for KT engagement.
** Key number includes the concept of the representative No which provided to each GW, it shall
setup when using KT/SK Networks. Excepting those two operators, service engagement shall setup
user account & password as per port.
GW/CONFIG/VOIP> auto 0 ©
=======================================================
1. Common
2. Nortel
(default : Common mode)
Enter SIP Operation mode : ©
/*If operator’s SSW is Nortel SSW(DACOM, ONSE), select No 2*/
-------------------------------------------------------
Enter "Key Number" mode (y/N) (default:N) : y ©
(A) : Asserted : P-Asserted-Identity --> KT
(P) : Preferred : P-Preferred-Identity -> SKNET
Enter Key number string type (A/p) (default:A) : ©
/*If it is competible with KT or SK Networks, select it & other operators select “N” */
-------------------------------------------------------
Enter User is phone [y|N] (default:N) : ©
-------------------------------------------------------
Enter Session timeout [0(OFF)~43200] (default:0) : ©
-------------------------------------------------------
R : request-uri
t : to -> SKNET
Which user name do you want from the received INVITE msg [R|t] (default:R) : ©
=======================================================
Server configuration
local Port [1025~65535] (default:5060) : ©