DV-332 Analog/Digital User Guide
98
9. Upgrading firmware
9.1 How to upgrade firmware
Davolink gateway supports FTP server feature to upgrade or downgrade firmware via Ethernet
connection at remote or local area.
1) Starting FTP server
In order to download firmware, GW uses FTP(File Transfer Protocol) as a file sharing method.
You can enable FTP server feature as following.
GW:/NETUTIL> ftpd ©
Current FTP Deamon task : Suspend
Usage : ftpd enable|disable
GW:/NETUTIL> ftpd enable©
password : ********© /* password is “ftpdftpd” */
Block mode enable? (y/N) n© /* If you choose ”y”, then you cannot downgrade firmware to
current or lower version. */
GW:/NETUTIL>
GW:/NETUTIL> ftpd©
Current FTP Deamon task : Running
Usage : ftpd enable|disable
GW:/NETUTIL>
After booting up GW, the frist status of FTP Daemon is "Suspend". If you run FTP daemon to upgrade
firmware, its status will be "Running".
2) Downloading firmware
After running FTP server in GW, please excute following commands in the PC that has firmware.
z Basically, firmware name will be like "xxx.bin”.