DV-332 Analog/Digital User Guide
15
4. Change Def. G/W IP.
5. Change Console Baudrate.
6. Change 1st DNS Server IP.
7. Change 2nd DNS Server IP.
8. Change DNS Domain Name.
0. Exit Menu.
What do you want to change (0-8) ? : 1©
Enter mode (DHCP/PPPoE/Static) : static©
#================ WAN PARAMETERS =======================
OP mode - STATIC
WAN IP Address - 192.168.2.200
WAN Subnet Mask - 255.255.255.0
WAN Gateway - 0.0.0.0
Ethernet Addr - 00:08:52:02:CA:FE
#================ CONSOLE PARAMETERS =======================
Console BaudRate - 19200 BPS
#================ DNS PARAMETERS =======================
1st Server IP - 168.126.63.1
2nd Server IP - 168.126.63.2
Domain Name -
#===========================================================
1. Change Operation mode.
2. Change IP Address.
3. Change IP Netmask.
4. Change Def. G/W IP.
5. Change Console Baudrate.
6. Change 1st DNS Server IP.
7. Change 2nd DNS Server IP.
8. Change DNS Domain Name.
0. Exit Menu.
What do you want to change (0-8) ? :
This is the instance of static operation mode. If you want to change the operation mode into DHCP
or PPPoE , choose DHCP or PPPoE in “Enter mode (DHCP/PPPoE/Static) :”.
After changing operation mode, you can change an IP address, subnet mask and default gateway
address choosing 2,3 and 4 in the menu.
What do you want to change (0-8) ? : 2©
Enter IP Address(xxx.xxx.xxx.xxx) : 220.120.246.203©
#================ WAN PARAMETERS =======================
OP mode - STATIC
WAN IP Address - 220.120.246.203
To Next Page
Loading...