DV-332 Analog/Digital User Guide
38
14 613 30 629
15 614 31 630
==========================================================================
===============================================================================
GW/CONFIG/ADDRESS>
3) Transmitted receiving number through FXO port or Digital port
With connected PSTN cable, if the call is received, FXO port can detect sending number & sending
number information which will be sent through digital port by connecting with R2/RPI can use as
caller number when VoIP’s sending. Normally, sender’s number information is able to combine by
2types under digital port connection. First, sender number can display user’s specified number +
transmitted internal number as sender’s shown number. Second, sender’s number can be displayed
by transmitted number only.
4) User’s specified number
When sending, if sender wants to show sender’s number with one representative number, this type
can be used.
According to setting type, sender’s number field in INVITE message can be changed so different
number might be printed from receiver party. Basically, INVITE message in display name should be
changed for alteration of sender’s number.
To Next Page
Loading...