EasyManua.ls Logo

Days Strider MD 4 - Setting up the Strider; Adjusting the seat height

Default Icon
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Issued: 24.02.2005
STRIDER MD
The following passage describes how to set up your Strider in order to
ensure that you have a comfortable and safe drive.
6.0 Setting up the Strider
6.1 Adjusting the seat height
Tilt the backrest forwards.
NOTE!
The seat must be removed from the
Strider in order to adjust the seat height.
You should try to get help from a second
person if possible or contact your dealer.
Removing the seat
Removing the seat:
Lift the seat while pulling the seat lock
(a) out of the seat support (1).
Adjusting the seat height
NOTE
If a captain’s seat is fitted, first pull
out the locking device (a) and then
fold the backrest forward (b).
Captain’s seat
Pull the rear panelling off the Strider
upwards.
Removing the rear
panelling
Removing the rear panelling:

Table of Contents

Related product manuals