Days Strider MD 4 - Fixing the rear panelling; Fitting the seat

58
Issued: 24.02.2005
STRIDER MD
Pull the seat lock (a) and guide the seat
into the seat support (1) from above.
Let go the seat lock and engage the
rotational adjustment by turning the
seat one way then the other.
➨
➨
Fitting the seat
Place the rear panelling onto the drive
unit from above.
While doing this:
- Introduce the engaging lever (a) into
the appropriate hole.
- Engage the rear panelling onto the
mountings (b) on the drive unit.
- Align the rear panelling to the
strider chassis (c).
➨
Plug in the light and indicator cable
connecting plug (12).
➨
Fixing the rear panelling
Transporting the Strider
14.4.4 Fixing the rear panelling
14.4.5 Fitting the seat
Connecting the light cable