57
Issued: 24.02.2005
STRIDER MD
Route the safety straps (9 + 10) across
the batteries as illustrated in the
photograph and tighten.
➨
and tightening the safety
straps
Place the batteries in the frame so that
the battery terminal is facing outwards.
➨ Reinserting the batteries
Plug in the battery cable connecting
plugs (11).
➨
NOTE
Please note that the narrow strap
(9) should be routed below the
battery cables.
Plug in the battery plugs
Pull the locking lever (7) and fold the
tiller forwards (8).
➨
Folding the tiller up
Transporting the Strider
14.4.2 Folding the tiller up
14.4.3 Reinserting the batteries