Need help?Do you have a question about the DEFEWAY D5010WH4 and is the answer not in the manual?
General| Mobile App | Yes |
|---|---|
| Video Compression | H.264 |
| Hard Drive Capacity | Up to 6TB |
| Remote Viewing | Yes |
| Motion Detection | Yes |
| Operating System | Embedded Linux |
| USB Interface | 2 x USB 2.0 |
| Power Supply | DC12V/2A |
| Video Input | 4CH BNC |
| Video Output | HDMI, VGA |
| Recording Resolution | 1080N, 720P |
| Hard Drive Support | 1 SATA HDD up to 6TB |
| Network Interface | RJ45, 10/100M |
Provides a general overview of the digital video recorder's features, technology, and applications.
Details the process of inspecting and connecting cables after unboxing the DVR.
Instructions for installing the Hard Disk Drive (HDD) into the DVR unit.
Describes the components and buttons on the front panel of the D5010WH4 DVR model.
Describes the front panel components for DVR models D6010DH8 and D6011FH8.
Describes the front panel components for DVR models D6012WH8, D7012FH16, and D8001CH24.
Details the connectors and ports on the rear panel of D5010WH4/D5011WH4 models.
Details the connectors and ports on the rear panel of D6010DH8/D6011FH8/D6012WH8 models.
Details the connectors and ports on the rear panel of D7010DH16/D7011DH16/D7012FH16 models.
Details the connectors and ports on the rear panel of the D8000WH16 DVR model.
Explains the functions of each button on the DVR's remote control for operation.
Instructions for powering the DVR on/off, previewing video, and basic menu navigation.
Overview of the main menu and access to the video playback interface.
Details on searching videos, using playback controls, and initiating manual recording.
How to control PTZ cameras and introduction to the system setup menus.
Steps for backing up video and overview of system setup categories.
Configuration options for general settings and video encoding parameters.
Configuration of recording schedules, modes, and days.
Configuration of network settings, including DHCP, IP address, and PPPOE.
Settings for display options and configuration of video detection features.
Detailed setup for PTZ cameras and sensor inputs.
Management of user accounts and hard disk drives.
Performing system maintenance tasks and restoring factory settings.
Viewing system information, HDD status, and system event logs.
Options for logging out users or rebooting the system.
Steps to connect the DVR to a network and configure UPnP settings.
Navigating the DVR interface to access network setup options.
Accessing the DVR remotely via IE browser using its IP address.
Accessing the DVR remotely using P2P mode via a web browser.
Instructions for installing necessary controls for P2P remote access.
Overview of the monitoring homepage and functions available in P2P mode.
To Next Page