4. Single line diagram
The DEIF controller contains the single line diagram. In DEIF terms, this is represented with the “Application configuration”.
There are two types of application configurations:
• Stand-alone configuration
• Power management configuration
A stand-alone configuration contains only one DEIF ASC controller in the plant configuration.
A power management configuration contains multiple ML-2 controllers (for example, ASC-4 Solar and AGC-4 Genset) in various
combinations.
4.1 Stand-alone application configuration
The application can be adjusted by using the PC utility SW. In the tab on the left hand side, the “application configuration” can be
selected. Then the configuration is done by selecting the plant specifics.
COMMISSIONING GUIDELINES 4189341077D EN Page 10 of 58
To Next Page
Loading...
