Deka DURATION DD5300 - Section 2 - Low Voltage Configuration; Product Introduction; Identifying the Individual Module

DEKA DURATION DD5300
27
SECTION 2 - LOW VOLTAGE CONFIGURATION
2.1 Product Introduction
The Deka Duration DD5300 Battery Modules can be used as an on-grid or off-grid energy storage system. It is not
recommended to use this product for any purpose other than the intended purpose as described in this document.
Use of this product other than as described in this document will nullify the product warranty. The substitution of any
components of this Battery Module will nullify the product warranty.
The use of any components contained within or connected to this Battery Module other than the products sold as part of
this product or recommended by the manufacturer will nullify the product warranty.
Connecting more than eight Deka Duration DD5300 Battery Modules in parallel will nullify the product warranty.
2.1.1 Identifying the Individual Module
Dimensions
mm
593x470x163
Cell type
Type
LiFePO4
Weight
lb (kg)
126.3 lb
(57.3 kg)
BMS Charge Temp
°F (°C)
+19.4°F to +131°F*
(-7°C to +55°C*)
Case Material
Type
Steel
BMS Discharge Temp
°F (°C)
+131°F to -4°F*
(+55°C to -20°C*)
Parallel Modules
Max No.
15
Suggested Storage Temp
°F (°C)
+77°F (+25°C)
(shelf life 1 year)
Stackable
Type
Yes
Storage Temp/Time outside the
suggested storage temperature
°F (°C)
-13°F to +131°F /
4 months
(-25°C to +55°C /
4 months)
Digital Output
No.
2+2
Self-Discharge @
77°F (25°C)
%
1% per month
Cell Distribution
P/S
16S
Self-Discharge outside the STC
%
< 3% per month
*Other variables can be introduced by the BMS