page 9
02_safety_en.fm
Information on the safety features
Bisky
Chapter 2 Information on the safety features
2.1 Safety criteria
In the design and construction of this machine standards and suitable precautionary
measures were adopted to satisfy the essential safety requirements of Machine Directive
2006/42/EC, Low Voltage Directive 2006/95/EC and Electromagnetic Compatibility
Directive 2004/108/CE and its successive amendments.
The accurate analysis of the risks carried out by the manufacturer has eliminated the main
obvious risks connected to the correct operation of the machine. The complete
documentation of the standards applied to the machine to ensure its safety are contained
in a technical manual of the machine deposited by the Manufacturer.
The Manufacturer recommends the final user to carefully follow the instructions, procedures
and recommendations contained in the manual, and to observe the safety features,
hygienic, and ambient regulations and laws in the working area of the machine. The
protective mechanisms foreseen are to be integral for the entire technical life of the
machine.
DANGER Do not wear large clothes, ties, neck laces, watches which might get
entangled in the moving parts of the machine.
NOTE The Manufacturer is not responsible for injury caused to people, domestic
animals or property, due to negligence, or for disregarding the contents on
the safety features and recommendations in this manual.
To Next Page
Loading...