page 72
06_Uso_en.fm
Use
Bisky
6.11 Switching off the machine
Switching off procedure :
1. Push the STOP button (12);
2. Turn the main door block switch (IG) to position 0, the switch is placed in the back
bottom guard of the machine.
NOTE It is important to always clean the machine and the surrounding area after
each working shift.
6.12 Introduction of the tray
When introducing the tray on the conveyor belt the tray must be lied against a side guide
(1) The guides makes sure the tray moves forwards in a straight manner.
Fig. 6.2 Tray side guide
To Next Page
Loading...