page 11
02_safety_en.fm
Information on the safety features
Bisky
2.3 Safety rules
The following safety information specifically refers to the use of a dropping machine model
Bisky.
Before starting up the machine, the operator must be fully aware of the location and
functioning of all the commands to operate and adjust the machine.
The operator must know how to carry out the adjustments described in this manual. Make
sure that the following safety rules are read and understood. They must be observed every
day, even during maintenance operations to the machine in order to avoid injuries to the
personnel and damage to the machine. The keys for the keylock switch (Fig. 2.1 Keylock
switch) for safety guards deactivation and machine start-up enabling must never be left on
the machine. They must be kept by the person in charge of the machine maintenance
operations or by the shop superintendent.
NOTE The Manufacturer cannot be held responsible for possible injuries to the
personnel in charge of machine and/or production line operation arising
from the non-observance of these safety rules and/or the tampering with the
machine and/or the production line safety devices.
Fig. 2.1 Keylock switch
To Next Page
Loading...