page 10
02_safety_en.fm
Information on the safety features
Bisky
2.2 Personnel qualifications
NOTE The Manufacturer is not responsible for injury caused to people, domestic
animals or property, due to negligence, or for disregarding the contents on
the safety features and recommendations in this manual.
Stage of machine
technical life
Qualifications of the responsible personnel
Transport The personnel transporting the machine must have read,
understood and applied the contents in:
Chapter 2 Information
on the safety features
,
2.3 Safety rules
a pag. 11 of this manual.
Installation An experienced and qualified electrician or technician that
have understood and applied the contents in:
Chapter 2
Information on the safety features
,
Chapter 3 Machine
Characteristics
,
Chapter 5 Machine programming
,
Chapter 7
Maintenance
.
Testing and fine tuning Qualified technical personnel thoroughly trained on this
specific machine, that have understood and applied the
contents in:
Chapter 2 Information on the safety features
,
Chapter 3
Machine Characteristics
,
Chapter 5 Machine programming
,
Chapter 7
Maintenance
Use Operator trained for the daily use of the machine must have
understood and applied the contents in:
Chapter 2 Information
on the safety features
,
Chapter 3 Machine Characteristics
,
Chapter 5
Machine programming
,
Chapter 7 Maintenance
.
Maintenance
There are three type of maintenance personnel that can
carry out repairs on the machine:
• Mechanical maintenance personnel : Qualified
mechanical technician that is capable of carrying out
maintenance with the guards open and in normal working
conditions, capable of intervening on mechanical parts that
need adjustment, maintenance and repair. It is forbidden to
intervene electrically whilst the machine is under electrical
tension.
• Electrical maintenance personnel : Qualified electrical
technician that is capable of carrying out electrical
maintenance with the guards open and in normal conditions,
capable of intervening on electrical parts that need
adjustment in the electrical panel even when the machine is
under tension.
• Construction technician : Qualified technician put at
disposal by the Manufacturer to carry out repairs and
maintenance of complicated nature and in particular
situations, in accordance with the owner of the machine.
Demolition Qualified mechanical technician that have understood and
applied the contents in:
Chapter 2 Information on the safety
features
.
To Next Page
Loading...