page 18
02_safety_en.fm
Information on the safety features
Bisky
Compulsory to wear anti-slip rubber boots
Compulsory to wear a protection work suit
Compulsory to wear a protective helmet
Dangerous zones and residual risks during the transport
The operator or the personnel exposed are subject to the following dangers in the zone
where the machine is moved around:
• Roughly push the operator or personnel exposed
• Danger to squash the operator or the personnel exposed
Compulsory for the operator to use the following safety measures:
• Wear protective helmet
• Wear shoes with hard protection top
• Wear protective gloves
DANGER During unloading, lifting and handling operations of the machine, the
personnel must be equipped with the appropriate PPE, such as: protective
gloves, boots, helmet and the proper equipment.
Dangerous zones and residual risks during the installation
The operator or the personnel exposed are subject to the following dangers in the zone
where the machine is moved around:
• Roughly push the operator or personnel exposed
• Danger to squash the operator or the personnel exposed
Compulsory for the operator to use the following safety measures:
• Wear protective helmet
• Wear shoes with hard protection top
• Wear protective gloves
Dangerous zones and residual risks during the utilization
The following risks are possible in the zone around the machine:
• Danger of fingers, arms getting caught or dragged in by the conveyor belt of the
machine
• Danger of getting your arms, fingers seriously injured when incorrectly inserting them
under the Plexiglas guards
• Danger of impact
• Danger of getting your arms and fingers squashed when the conveyor belt lowers
itself automatically.
To Next Page
Loading...