page 36
05_Programmazione_en.fm
Machine programming
Bisky
FIXED STRAIGHT NOZZLES WITH ROTATION
•N° OF ROWS
The value you digit must be equal to the number of rows of biscuits that can fit onto
one tray.
• RETARD MOVEMENTS:
TThe value you digit will determine the quantity of dough that will be deposited
before the nozzle start to rotate.
•EXTRUSION TIME:
The value you digit will determine how much dough will be extruded (biscuit size).
• DEPOSITING SPEED:
The value you digit (from 1 to 100) will determine the speed at which the dough will
be extruded (speed of rollers) and consequently also the size of the biscuit.
• NOZZLE ROTATING TIME:
The value you digit will determine for how long a time the nozzles will rotate.
• NOZZLE ROTATING SPEED:
The value you digit (from 1 to 100) will determine the speed at which the nozzle will
rotate during the nozzle rotating time.
• SUCTION TIME:
The value you digit will determine the suction time (quantity of dough) that will be
sucked back up the nozzle after each deposit.
• SUCTION ON/OFF:
When the suction is OFF, the suction will start when the tray drops down after each
deposit (DOUGH DETACHMENT). If the suction is ON the tray conveyor table will
drop (DOUGH DETACHMENT) only after the suction has been completed.
• REPEAT CYCLE TIME:
The value you digit will determines the pause time of the belts after a tray has been
filled (automatic re-start of belts).
• NUMBER OF TRAYS:
The number you digit will determine how many trays of that recipe you will produce
in automatic mode.
•TRAY EDGE:
The value you digit will determine the distance the tray will advance (distance =
from tray edge to first deposit) before the first row of biscuits is deposited.
• ROW SPACE:
The value you digit will determine the space between each row of biscuits.
• HORIZONTAL DOUGH DETACHMENT:
ON/OFF enables, disables the horizontal dough detachment.
• PAUSE BEFORE SUCTION:
The machine pauses before the suction phase starts. This pause duration can be set.
To Next Page
Loading...