page 91
07_Manutenzione_en.fm
Maintenance
Bisky
NOTE The main body of the machine is constructed in aluminium structure and
stainless steel coverings.
The guardings are in shock-resistant plexiglass.
The guarding over the hopper is in stainless steel
The parts in contact with the dough are in stainless steel and aluminium anti
cordal.
The belts in synthetic rubber.
The electrical components are in plastic.
NOTE After dismantling the parts must be separated one from each other and
eliminated accordingly and by authorised structures.
Residual risks after dismantling of the machine
If the dismantling procedure described in this manual are strictly followed, there is no risk of
residual parts after the dismantling operations.
To Next Page
Loading...