Dell 32 Plus - Routing the Cable to Side I;O (Optional); 12. Organizing Your Cables

13
Connecting the cables
Routing the cable to side I/O (optional)
Figure 11. Routing the cable to side I/O
To route the cable to the side I/O:
1. Insert the HDMI cable into the side I/O connector.
2. Insert and organize the cables under the restraint lever as shown above.
Organizing your cables
Route the cables through the cable management guide on the stand riser.
Figure 12. Organizing your cables
After connecting all necessary cables to your monitor and computer, (see Connecting the cables for cable attachment) organize all
cables as shown in the image.
If your cable is not able to reach your computer, you may connect directly to the computer without routing through the cable
management guide on the monitor stand.