Dell 6100 - Table 1-2. System-Board Jumper and Switch Descriptions

1-18 Dell PowerEdge 6100/200 System Service Manual
Table 1-2. System-Board Jumper and Switch
Descriptions
Jumper/Switch Setting Description
CLEAR CMOS
(default)
Settings in CMOS and the RTC
are reset to factory defaults during
reset.
Settings in CMOS and the RTC
are retained during reset.
CLEAR
PASSWORD
(default)
Clears all passwords.
Retains all passwords.
RESERVED
(default) Reserved
(do not change)
.
BIOS
RECOVERY
(default) Normal BIOS boot operation.
Enables recovery mode for BIOS
flash memory (the BIOS WRITE
jumper must also be in its default
position).
BOOT BLOCK
PROTECT
(default) Reserved (
do not change
).
BIOS WRITE
(default) Enables BIOS update of flash
memory.
Disables BIOS update of flash
memory.
FLOPPY 0
(Dell
default)
Enables 1.44-MB diskette drive
size or autodetection. Disables
2.88-MB size detection.
Enables forced 2.88-MB diskette
drive size detection.