Dell 6100 - Figure 4-18. Memory, Microprocessor, and Termination Module; Memory, Microprocessor, and Termination Module; Removal

Removing and Replacing Parts 4-19
Memory, Microprocessor, and Termination Module
Figure 4-18. Memory, Microprocessor, and Termination Module
Removal
1. Remove the left computer cover.
2. Remove the support panel.
3. Remove the module.
Grasp the module by the corners and carefully pull the module out until the
edge connectors are free from the system board connectors.
NOTES: Both microprocessor module connectors must be populated. The
secondary can have another microprocessor module or a termination
module.
Be careful not to touch components or the gold edge connectors on the
module.
memory module
secondary
microprocessor or
termination module
primary
microprocessor
module