Dell 6100 - Control Panel; Figure 4-13. Control Panel Removal

4-14 Dell PowerEdge 6100/200 System Service Manual
C
ontrol Panel
Figure 4-13. Control Panel Removal
1. Remove the bezel.
2. Remove the screw holding the control panel to the chassis.
3. Disconnect the cables from connectors BP_to_CP, I
2
C_to_BP, and J1.
4. Disengage the panel from the hooks holding the panel to the
computer chassis, and lift the panel away from the computer.
control panel
screw
connector BP_to_CP
connector I
2
C_to_BP
battery
connector J1