System Setup Program A-7
Peripheral Configuration Submenu
Figure A-4. Peripheral Configuration Submenu
Table A-4. Advanced Menu Categories
Category Function
Processor n Displays the type and speed of the micro-
processors. No user-selectable options.
Cache Size Displays amount of L2 cache memory in
microprocessor module. No user-selectable
options.
Chip Set Stepping Displays the system chipset’s stepping
value
.
No user-selectable options.
Peripheral Configura-
tion
Displays a submenu. See the next sub-
section, “Peripheral Configuration
Submenu.”
Advanced Chipset
Configuration
Displays a submenu. See the subsection,
“Advanced Chipset Configuration Sub-
menu.”
Plug and Play Configu-
ration
Displays a submenu. See the subsection,
“Plug and Play Configuration Submenu.”
Configuration Mode Auto
Standard IDE Interface Disabled
Floppy Interface Enabled
Serial Port 1 Address COM1, 3F8h
Serial Port 2 Address COM2, 2F8h
Parallel Port Address LPT1, 378h
Parallel Port Mode ISA Compatible
Parallel Port ECP-DMA Disabled
Serial Port 1 IRQ IRQ4
Serial Port 2 IRQ IRQ3
Parallel Port IRQ IRQ7
Onboard SCSI-A ROM Scan Enable
Onboard SCSI-B ROM Scan Enable
Console Redirection Disable
F1 Help
ESC Back
Enter Select
Previous Item
Next Item
Select Menu
F5 Setup Defaults
F6 Previous Value
F10 Save & Exit
Peripheral Configuration