Dell 6100 - Page 96

4 Dell PowerEdge 6100/200 System Service Manual
R
RESERVED jumper, 1-19
RESERVED switch, 1-18
reset button
location on front panel, 1-3
resource conflicts
eliminating, 2-5
RTC chip
location on system board, 4-16
removing and replacing, 4-25
S
SCSI backplane board
connectors, 1-22
illustrated, 1-21
removal, 4-11
SCSI cable, 1-10
SCSI connectors, 4-16
SCSI controllers, integrated, 1-8
SCSI devices
cable, 1-9, 1-10
external, slots, 1-6
ID numbers, 1-9
termination, 1-9
SCSI hard-disk drives. See hard-disk
drives, SCSI
SCSI ID numbers, 1-9
SERIAL connectors, 4-16
serial port connectors
location on I/O panel, 1-6
location on system board, 4-16
server-management module connector,
4-16
SIMMs
memory module illustrated, 1-7, 4-20
module connector on system board, 4-16
removal, 4-20
sockets
battery, 4-14, 4-28
on memory module, 4-20
on microprocessor module, 1-20
RTC chip, 4-16
specifications, technical, 1-24
subsystems
advanced expansion, 1-7
support panel
removal, 4-18
switches
on system board, 1-18
system board
components, 1-16, 4-16
jumpers, 1-17
location, 1-4
removing and replacing, 4-27
switches, 1-17
system error messages
list of, 3-2
system features, 1-1
system power supply, 1-10
system setup program
Advanced Chipset Configuration sub-
menu, A-9
Advanced menu, A-6
Boot Options submenu, A-5
Exit menu, A-14
Floppy Options submenu, A-4
key functions, A-2
Main menu, A-3
menus, A-1
Peripheral Configuration submenu, A-7